Why does my fire alarm keep beeping?
Most of the fire alarm system will beep at regular intervals to showcase their batteries are low. In case you find your fire-alarm making noises randomly, there might be different other things going on. You would never want your fire alarm to keep on buzzing all the time, right?
You would agree that this is one of the most annoying sounds in the world. Your house alarm or your fire detector emits a beeping noise every 30 seconds to a minute, and this just would not stop. Come on, it can drive anyone crazy. If you are facing such an issue, you need to find out the root cause and fix it. It is important because what if you have a real fire situation and you think that your alarm is randomly beeping? It might end up in a big fire in your house or office. So, make sure that you do not overlook your fire alarm issue.
Fire Alarm System
Well, the following are a few of the many reasons that might be causing your fire alarm to beep.
The battery in your fire alarm may be loose or improperly installed. You should ensure that the battery fits accurately in the battery slot. If it is not then the connections might not make good contact with the battery. In case the battery was not put into the slot rightly, just take it out and place it back. The problem will resolve.
It would be good if you keep an eye on the situation of your battery. You might buy a battery tester from your local hardware store or online and you can easily use it around your home to make sure that your alarm system works effectively. It would also give you an early heads-up that you require to replace the dying batteries.
Dirty Fire Alarm Cover
There can be a possibility that the fire alarm could be dirty. Over time, dust and dead bugs might collect in the sensor chamber of the fire alarm. It is something that triggers it to chirp. You must ensure that you keep the chamber of your sensor clean.
Remember that the easiest way to do this is to simply vacuum it out whenever you change the batteries. Then in case, the room in which you want to install the smoke detector is actually dusty, install an ionization fire alarm so the dust does not impact it.
Before you try to clean the fire alarm, make sure that you remove the battery and turn off any electricity that might be going into the unit. And yes, remember to use only a dry and clean cloth to Wipe away any obvious debris.
There is sometimes the problem with the reset thing. Your fire alarm might need to be reset. Most of the new electronic fire alarms are available with logic boards and these inform the alarm to beep when the battery drops low. Unfortunately, replacing the battery does not always stop the chirping! At times you need to hit the RESET button so as to make sure that the fire detector works effectively.
There can be an issue with the power and the power could have been interrupted to the fire alarm. A power surge might interrupt power to the fire alarm and it triggers it to beep when the power gets restored. Once you reset the fire alarm, it should fix the issue.
Hence, once you try out all these things and the beeping issue still persists, it would be good if you replace your fire alarm. You can even consult professionals like Firemint before you buy a new one. Experts can fix it with their advanced tools.