My Final project was a Dispenser, My concept Behind this project was to have my own Dispenser because it will be useful for me in get togethers at my place. my guests can refresh their drink by themselves and it’s convenient for me as-well. As a host i do not have to worry about serving drinks to them.
Attached is the picture of my final work which is separated in 3 parts.
First picture is i made out enclosure from card board to see how it will look.
Second picture is the wood being laser cut in laser cutting machine.
Third picture is the final enclosure of my dispenser.
Industrial Glue, Batteries, Plastic Tubes, Wires, Air pump, Buttons.
I put it all together with industrial glue.
It works with air pump, buttons, batteries & Tubes, i used two bottles, coke & sprite, for each bottle i used separate batteries. i solder the wires, buttons & air-pump together. lastly i attached plastic tubes with air-pump and put it in bottle & lastly i made sure that bottle cap were sealed so air won’t come out and as you can see in picture attached, coke is dispensing in cup.