#simrahali Tumblr posts

  • simrahali
    19.12.2019 - 1 year ago

    FINAL PROJECT

    My Final project was a Dispenser, My concept Behind this project was to have  my own Dispenser because it will be useful for me in get togethers at my place. my guests can refresh their drink by themselves and it’s convenient for me as-well. As a host i do not have to worry about serving drinks to them. 

    Attached is the picture of my final work which is separated in 3 parts.

    First picture is i made out enclosure from card board to see how it will look.

    Second picture is the wood being laser cut in laser cutting machine.

    Third picture is the final enclosure of my dispenser.

    Supplies:

    Industrial Glue, Batteries, Plastic Tubes, Wires, Air pump, Buttons.

    I put it all together with industrial glue.

    PROCEDURE:

    It works with air pump, buttons, batteries & Tubes, i used two bottles, coke & sprite, for each bottle i used separate batteries. i solder the wires, buttons & air-pump together. lastly i  attached plastic tubes with air-pump and put it in bottle & lastly i made sure that bottle cap were sealed so air won’t come out and as you can see in picture attached, coke is dispensing in cup. 

    View Full
  • simrahali
    20.11.2019 - 1 year ago

    Final Project Ideas: My final project idea is to make FOUNTAIN MACHINE

    Concept: I want to to built this, because when you have get together in your home, It’s annoying to serve people drinks, so the idea is that my guests can refresh their drink by themselves and it’s convenient for me aswell. As a host i do not have to worry about serving drinks to them. 

    Attached is the picture of the wireframe of my Project.

    Materials that i will need is Plexi glass, i will be making my fountain machine from a Plexi glass, other components i need is Push buttons, Air pump, Led’s, tube, some wires & Soda bottles. 

    View Full
  • simrahali
    20.11.2019 - 1 year ago

    MIDTERM PROJECT

    My project was a Piggy Bank, My concept Behind this project was to make my own personal piggy bank where i can save money, It was interesting to me so i thought it would interest to use it aswell and at the same time it would help me too.

    Attached is the picture of my setup of arduino.

    How it works:

    It works with ultra sonic sensor as you can see in picture above, which is also called distance sensor, with sensor you put your hand in-front and it opens the piggy bank with the help of servo motor to put the money in piggy bank. 

    Code:

    #include   //servo library Servo servo;     int trigPin = 5;     int echoPin = 6;   int servoPin = 7; int led= 10; long duration, dist, average;   long aver[3];   //array for average void setup() {          Serial.begin(9600);    servo.attach(servoPin);      pinMode(trigPin, OUTPUT);      pinMode(echoPin, INPUT);      servo.write(0);         //close cap on power on    delay(100);    servo.detach(); } void measure() {   digitalWrite(10,HIGH); digitalWrite(trigPin, LOW); delayMicroseconds(5); digitalWrite(trigPin, HIGH); delayMicroseconds(15); digitalWrite(trigPin, LOW); pinMode(echoPin, INPUT); duration = pulseIn(echoPin, HIGH); dist = (duration/2) / 29.1;    //obtain distance } void loop() {  for (int i=0;i<=2;i++) {   //average distance    measure();                 aver[i]=dist;                delay(10);              //delay between measurements  } dist=(aver[0]+aver[1]+aver[2])/3;     if ( dist<50 ) { //Change distance as per your need servo.attach(servoPin);  delay(1); servo.write(0);   delay(3000);       servo.write(150);     delay(1000); servo.detach();       } Serial.print(dist); }

    View Full
  • ivefall2018
    08.09.2018 - 2 years ago

    These are photo sequence from my favorite movie. I chose this sequence because even without knowing about movie you could tell that this sequence describes emotional feelings. The camera  focus is only on main characters. I like how in first two shots the background is whole black and in other shots it’s white which catches the attention. The angles of the camera makes the viewer eyes goes directly on the character emotions. Lastly, all the colors are very light tones. 

    View Full
  • ivefall2018
    07.09.2018 - 2 years ago

    This is one of my favorite art work from last semester that i created on photoshop.

    View Full